RF REPEATER


Overview


Feature

• RF Repeater
• ICS Repeater
• TDD RF Repeater
• DAS Repeater
• Home, In-door, Out-door Type
• Support of multiple frequency bands
• Indoor and outdoor installation
• Full remote monitoring and alarming
• Easy commissioning and setup via web-based GUI
• Flexible and future proof
• Compliant with all regulatory standards (e.g. ETSI, FCC, IC etc.)
• Optimized performance by statistic measurements

RF Repeater : Indoor , Outdoor

NO
Parameter
Unit
Specification
Remark
1 Frequency Range MHz TETRA, GSM,WCDMA,UMTS,LTE Select according to the need
2 Frequency Tolerance ppm 0.05ppm  
3 Output Power dBm DL : +10dBm~+37dBm
UL : +10dBm~+23dBm
Select according to the need
4 Gain dB '+65dB~+95dB Select according to the need
5 Gain Flatness dB 3dB Ripple in Band
6 Gain Varation over Temp. dB ±3dB  
7 Gain adjustment range dB 30dB / 1dB Step  
8 ALC Range dB 15dB Auto Level Control
9 Shutdown dBm ≥+13dBm~+39dBm  
10 VSWR - 1.5 : 1  
11 System Group Delay ≤ 5㎲ Transmission Delay
12 Noise Figure dB ≤ 7dB Uplink @ Max Gain
13 Out of Band Gain - 3GPP  
14 Function - Isolation and Over Power Check
Auto Gain Control
GUI , NMS
Option, Select according to the need
15 LED - DC Power, ALC, Shutdown Select according to the need
16 Power Supply - 100~240V DC Adaptor
17 Work temperature '-20℃~+40℃(indoor); -40℃~+55℃(outdoor)
18 Typical Application 1) Indoor: Shopping Malls, Hotels, Offices building ,Exhibition, Basements, Tunnels etc
2) Outdoor: City, Villages, Country, District, Mine, Factories and mines, Highway, Railway etc
3) The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than -70dBm;
4) And can meet the requirement of antenna isolation to avoid self-oscillatio



Digital ICS Repeater

NO
Parameter
Unit
Specification
Remark
1 Frequency Range MHz WCDMA,UMTS,LTE Select according to the need
2 Input Level dBm DL : -60dBm~-30dBm
UL : -55dBm
Select according to the need
3 Output Level dBm DL : +10dBm
UL : +13dBm
Select according to the need
4 Gain dB Built-in Ant : +75dB
External Ant : +70dB
 
5 Gain Control Range dB 30dB / 1dB  
6 Auto Shutdown Level dBm DL : +13dB
UL : +16dB
 
7 System Group Delay ≤ 5㎲  
8 Gain Flatness dB 3dB  
9 VSWR - 1.5 : 1  
10 Noise Figure dB ≤ 5dB  
11 Power Supply   100~240V DC Adaptor
12 Work temperature -20℃~+60℃
13 Interference Cancellation 1㎲  
14 Gain Tracking Time sec 1sec Target Gain ± 1dB
15 Operating Humidity % 95%  
16 Heat Dissipation - Natural Convection  
17 Impedance Ω 50 Ω  
18 Fading Performance
(Multi-path 10)
Static EVM ≤ 8%~10%
Gain Variation≤2dB
 
3Hz EVM ≤ 8%~10%
Gain Variation≤2dB
 
19 Typical Application 1) Indoor: Shopping Malls, Hotels, Offices building ,Exhibition, Basements, Tunnels etc
2) Outdoor: City, Villages, Country, District, Mine, Factories and mines, Highway, Railway etc



Pico Booster - 3G WCDMA / Feature:Complies to 3GPP Standard

ITEM
Description
Specification
1 Frequency Range Up Link (RX) 1960 ~ 1980 MHz
Down Link (TX) 2150 ~ 2170 MHz
2 Channel Spacing 5 MHz
3 Operating Band:Number of Channels 4 FA (20MHz)
4 Gain 60 dB
5 Gain Flatness ≦ ± 1.5 dB (Peak to Peak ≦ -0dB ~ +3dB)
6 Automatic Gain Control Range (AGC) ≧ 25 dB(Output Power ±2dB)
7 Output Power Accuracy (Over All Conditions) ≦±3 dB
8 Maximum Output Power Up Link (RX) ≧10dBm
Down Link (TX) ≧10dBm
9 Automatic Shut Down Power Level
(Always Auto Recovery)
Up Link (RX) O/P ≧ + 13 dBm  (RMS)
Down Link (TX) O/P ≧ + 13 dBm  (RMS)
10 Group Delay ≦6μs
11 Noise Figure(Uplink) < 6 dB @Max Gain
12 VSWR ≦ 1.5:1
13 TX / RX Isolation > 85 dBc
14 Frequency Stability < ± 0.01 ppm
15 Out of Band Gain 2.7≦f_offset<3.5 MHz < 60 dB
3.5≦f_offset<7.5 MHz < 45 dB
7.5≦f_offset<12.5 MHz < 45 dB
12.5 MHz≦f_offset < 35 dB
16 Spectrum Emission Mask 2.5MHz≦f_offset<2.7MHz < - 22 dBm / RBW 30 KHz
2.7MHz≦f_offset<3.5MHz < - 34 dBm / RBW 30 KHz
3.5MHz≦f_offset<4.0MHz < - 34 dBm / RBW 30 KHz
4.0MHz≦f_offset<8.0MHz < - 21 dBm / RBW 1 MHz
8.0MHz≦f_offset<12.5MHz < - 24 dBm / RBW 1 MHz
17 Spurious Emission (Category B) 9 KHz ~ 150 KHz < - 13 dBm / RBW 1 KHz
150 KHz ~ 30 MHz < - 13 dBm / RBW 10 KHz
30 MHz ~ 1 GHz < - 13 dBm / RBW 100 KHz
1 GHz ~ 12.75 GHz < - 13 dBm / RBW 1 MHz
18 Error Vector Magnitude (EVM) < 10 % (Support HSDPA)
19 Peak Code Domain Error (PCDE) < - 35 dB (3GPP TS 25.106)
20 Adjacent Channel Rejection Ratio (ACRR) ± 5 MHz > 25 dBc
± 5 MHz & ±10 MHz
21 Impedance 50Ω
22 Service Antenna Build-in & ≧0dBi
23 Donor Antenna External with holder, Gain ≧7dBi, (1ea)
24 RF Connector Type SMA-Female
25 Dimensions ≦125*90*35 mm (exclusive bracket, connector)
26 Weights ≦1kg
27 Power Adaptor AC 100~240V
28 Isolation auto shut down Available
29 Other Including Antenna Holder & Mounting kit
30 Operation Temperature 0~50℃
31 Environment Condition IP42
32 Humidity 70%~90%
33 Sealing Indoor
34 Local Control  Via Micro USB port at local site

LED Indicators
35 LED Indicators On (green) / Off (dark) PSU
Normal (dark) or Alarm (red color) AGC UL and DL HPA Failure (1pcs LED)
UL and DL Isolation Alarm (1pcs LED)
Input Level Display (by LED Bar)
36 Auto Shutdown when Isolation is not enough and Auto recovery when Isolation is enough
37 Auto Attenuation function according to real environment Isolation level to set up

*Isolation Detection Function
– Auto Gain setting if Isolation between Donor and Service antenna is not enough during installation.
– Auto Isolation checking out period setting function.
– Manual setting available for Isolation Check period (1 hour basis, Max 255 hours, 1 hour / step) by GUI setting..(Factory setting 4 Hr.)
– When booster is installed and DC inputted, Isolation checking function is activated by 10times per each 5 seconds and setting results follows last 10 times value.





help send mail
Copyright 2019 © ECHO RF SOLUTION